Skip to content
Adcom Kitchen & Flooring
1980s two-story homes in a Calabasas planned community below oak-dotted hills in late afternoon

Calabasas, Los Angeles County

Kitchen Remodeler in Calabasas, CA

If you are choosing a kitchen remodeler in Calabasas, CA, the North Hollywood showroom is about 32 minutes (20 miles) east along the 101, and every cabinet, counter, tile and floor option can be compared there in one trip. Calabasas stands out for how much of it was built as planned communities between the 1970s and 1990s, with Calabasas Park the best-known example. Many of those houses still have their original oak cabinets, almond tile counters and builder-grade floors, now reaching the end of their useful life.

about 32 minutes (20 miles) from the North Hollywood showroom

Original oak and builder tile in Calabasas Park homes

Homes from this era tend to share a pattern: a family kitchen with an island or peninsula open to a family room, raised-panel oak cabinets with a honey finish, square tile counters with wide grout lines, and a mix of tile, vinyl and carpet underfoot. The layouts are usually sound, which is good news, because it means the budget can go into finishes rather than moving walls.

Option for 1980s oak cabinetsWhen it makes sense
Refinish or paint the existing doorsBoxes are solid, layout works, and the goal is a lighter look on a modest budget
Reface with new doors and drawer frontsBoxes are sound but door style is the problem; see cabinet refacing
Replace cabinets entirelyBoxes are water-damaged at the sink, sizes are awkward, or the counter and floor are being replaced too
Original 1980s Calabasas kitchen with honey oak raised-panel cabinets and almond tile counters
Honey oak raised panels and tile counters are typical of 1980s planned-community kitchens.Illustration

Kitchen remodeler work Calabasas owners ask about most

Planning a project in Calabasas?

Call the showroom with photos and rough measurements of your Calabasas home, or plan a visit to compare materials side by side.

HOA architectural review, Calabasas permits and fire-zone hills

Most Calabasas neighborhoods have homeowners associations, and several are gated. Interior kitchen work seldom needs architectural approval, but associations commonly set contractor hours, gate check-in procedures and where trucks and dumpsters can sit. Ask your HOA before scheduling a slab delivery.

Calabasas is its own city, and its Building & Safety Division reviews permits for work that moves plumbing, gas or electrical lines or alters walls. A finish-only refit in the same layout generally does not reach that bar. For permitted work, the CSLB license search will tell you whether each tradesperson is properly licensed. The city sits in the Santa Monica Mountains, much of it in fire hazard severity zones; the 2018 Woolsey Fire burned the hills to the west, and smoke-damaged kitchens are covered on the damage repair page.

Delivery truck with a crated countertop slab climbing a steep driveway in a gated Calabasas community
Gate check-in and steep driveways are part of planning a slab delivery here.Illustration

Old Town, Parkway Calabasas and Las Virgenes water: local details

Calabasas homes get power from Southern California Edison and gas from SoCalGas, and their water from the Las Virgenes Municipal Water District, which relies on imported supply; when the sink is replaced, WaterSense-labeled faucets are worth a look. Old Town along Calabasas Road, home to the Leonis Adobe museum, is the historic core, while most remodeling stock lies in the tracts and gated enclaves off Parkway Calabasas and Mulholland Highway. Malibu Creek State Park sits just south down Las Virgenes Road.

Hillside lots raise practical points. Steep driveways and gate codes decide how a slab truck gets close, and inland canyon afternoons run far hotter than the beach on the other side of the mountains, so engineered wood is steadier than solid planks in sunny family rooms.

Wide-plank engineered oak running from kitchen into a sunlit family room in a Calabasas hillside home
Engineered planks cope better than solid wood with hot afternoons through big sliders.Illustration

West on the 101 from Sherman Way: planning a Calabasas order

  1. Decide on the boxes

    Open every cabinet and check the sink base for water damage; that one inspection often decides between refacing and replacing.

  2. Bring the family room into it

    In open plans, the floor and island are seen from the family room, so measure and photograph both spaces.

  3. One trip, all finishes

    Take the 101 east, cut north toward Sherman Way, then compare doors, slabs, tile and planks side by side.

  4. Check in your own light

    Calabasas kitchens often get strong afternoon sun through big sliders; take samples home for a day.

  5. Order with HOA timing in mind

    Measurements are confirmed, then delivery and optional installation are set inside your association’s allowed hours.

No Calabasas projects or city-tagged reviews are shown here. Two things are verifiable: the showroom’s address on Sherman Way is unchanged on archived versions of its website back to 2015, and Google reviewers describe staff who meet competing quotes within reason. Hidden Hills and Agoura Hills are next door.

Remodeled open Calabasas kitchen with white oak cabinets, quartz island and large porcelain floor tiles
Large-format porcelain suits the bigger open rooms of 1980s-90s plans.Illustration

What Google reviewers say about the showroom

Quoted from public Google reviews. Adcom Kitchen & Flooring has 20 Google reviews; read them all on Google.

“Tony is the man! Tell them your needs and they will work with you. Been coming here for the last 6 months and we keep getting the same great and honest service as day one.”
Erik G. Google review · c. 2024
“They have a huge selection of kitchen cabinets, tiles and flooring. But the best part is their service. Tony Jr. is beyond reasonable, honest and he went out of his way to make sure we get the products and meet our deadlines. Highly recommended!”
Larry T. Google review · c. 2023

Calabasas questions

What is the best way to update 1980s oak cabinets in a Calabasas home?

It depends on the boxes. If they are solid and the layout works, refinishing or refacing with new doors is the lighter-budget route. If the sink base is water-damaged, sizes are awkward or you are replacing counters and floors anyway, new cabinets usually make more sense. Bring photos of the inside of your cabinets to the showroom to compare options.

How long does a kitchen remodel in Calabasas usually take?

A same-layout kitchen typically needs a few weeks on site after materials arrive. Refacing is usually faster than full replacement; semi-custom cabinets take longer to arrive than stock; slab tops are templated after cabinets are set. HOA scheduling rules and, for moved plumbing or electrical, City of Calabasas permits and inspections can extend the timeline.

Can flooring for the rest of my Calabasas home be installed with the kitchen?

Yes. In open 1980s and 1990s plans the kitchen floor is usually continuous with the family room and entry, so replacing them together avoids an obvious seam. Large-format porcelain and engineered wide plank are popular for these bigger rooms. Installation of the flooring you buy is available on request.

How far is Calabasas from your North Hollywood showroom?

About 32 minutes (20 miles), depending on traffic on the 101. Most drivers take the Ventura Freeway east and exit toward Sherman Way or the 405. Late mornings and early afternoons on weekdays usually avoid the heaviest commute traffic in both directions.

Nearby areas we serve

Call before your Calabasas visit

A quick call lets the showroom pull samples for your project before you make the drive.

Adcom Kitchen & Flooring · 13259 Sherman Way, North Hollywood, CA 91605 · Get directions · Showroom hours

Call (818) 765-9955 Directions