Skip to content
Adcom Kitchen & Flooring
L-shaped kitchen with gray-veined white quartz countertops and an island in a bright Los Angeles home

Countertops

Countertops in Los Angeles, CA

Kitchen countertops in Los Angeles homes come down to two choices at our North Hollywood showroom: the stone itself (granite, quartz or marble) and the format it arrives in, either a full slab cut to your cabinets or a prefabricated top with the edge already finished. You can set samples of each against cabinet doors, backsplash tile and flooring in the same room, then have the top you pick templated and installed when you want it.

Countertops in North Hollywood: what you can compare in one visit

A countertop is the largest flat surface in the kitchen and the one your eye lands on first, so it is worth choosing in person. The Sherman Way floor groups the counter material near the cabinetry, which means you can see a speckled granite next to a cherry door or a veined quartz beside a white Shaker box before anything is cut.

  • Granite. Natural stone with movement, flecks and color that varies slab to slab; strong against heat and scratches. See granite countertops for colors, edges and sealing.
  • Quartz. Engineered stone with consistent patterns, from solid whites to marble-look veining, and no sealing schedule. The quartz countertops page covers islands and heat limits.
  • Marble. Carrara and other soft, veined marbles for bakers, islands and vanities, in honed or polished finishes. Read marble countertops before committing a busy kitchen to it.
  • Prefabricated tops. Pre-edged pieces at standard depths that keep a rental, bathroom or small kitchen cost-efficient. Details on prefab countertops.
  • Sinks. Stainless steel kitchen sinks and glass bowl sinks for vanities, matched to the cutout. Browse kitchen sinks.
  • Installation. Templating, fabrication, cutouts and setting of the top you bought, explained step by step on countertop installation.
Granite, quartz and marble countertop samples laid on a white Shaker base cabinet
Laying granite, quartz and marble samples on a real cabinet shows how each reads against the finish.Illustration

Slab countertops in Los Angeles or prefabricated: which format suits the job?

Both formats can be granite or quartz, and both can look sharp in a finished kitchen. The difference is how much of the shaping is done for you in advance and how much freedom you keep over seams, edges and overall size.

General differences; what is available depends on the stone and the pieces on hand.
QuestionFull slabPrefabricated top
How is it sized?Cut from a whole slab to a template of your cabinetsPre-cut to standard depths and lengths, trimmed to fit
Edge profileYour choice, shaped after the templateUsually comes already finished
SeamsPlaced where the layout and slab allowOften more pieces, so more joints on long runs
Pattern controlYou can view the actual slab and plan where veins landPattern is what the piece shows
Typical fitL-shaped and U-shaped kitchens, large islands, statement stoneStraight runs, bathrooms, rental units, budget remodels

Mixing the two is common: a slab island as the centerpiece with prefabricated perimeter tops, or slab in the kitchen and prefab vanity tops in the bathrooms. The format is a budget lever, not a quality verdict.

Questions about countertops?

Call with your measurements and photos, or stop by Sherman Way to compare cabinets, counters, tile and flooring side by side.

Granite and quartz countertops next to marble: the practical trade-offs

Looks get most people to the sample wall; daily habits should make the decision. Think about who cooks, how often lemons, wine and tomato sauce end up on the counter, and whether the island sits in a sunny spot.

MaterialHeatStains and etchingUpkeepCharacter
GraniteHandles hot cookware wellResists most stains once sealedReseal on a schedule based on the stoneEvery slab is different
QuartzResin can scorch; use trivetsNonporous, very stain resistantWipe clean, no sealingConsistent color and veining
MarbleTolerates heatAcids etch the surface; can stainSeal and accept a patinaSoft, classic veining

A good test: bring a lemon wedge and a dark sauce in your head, not your bag, and ask how each sample would look after a year of that. If a dull ring by the coffee maker would bother you, marble belongs on a vanity rather than the main prep zone.

From sample to set top: how a countertop project runs

  1. Start with the cabinets and the room

    Bring a cabinet door or finish sample if you have one, plus photos and rough dimensions of each run, the island and the sink wall. If cabinets are new, choose them alongside the stone.

  2. Narrow the material and format

    Compare granite, quartz and marble samples, then decide between a full slab and prefabricated pieces based on layout and budget.

  3. Pick edges, sink and cooktop

    Choose an edge profile and settle the sink model and cooktop or range, because their dimensions set the cutouts.

  4. Template after the cabinets are set

    Stone is measured once base cabinets are installed, level and fastened, so the top matches the real boxes instead of a drawing.

  5. Fabrication and seam layout

    The top is cut, edged and drilled for the faucet; seams are planned at sensible points rather than over the dishwasher or a cooktop.

  6. Installation on request

    The pieces are set, seams filled and leveled, and the sink is mounted. Plumbing and gas reconnections go to the appropriate licensed trade.

Thin template strips laid on newly installed base cabinets before a stone countertop is cut
Templates are taken once the base cabinets are level and fastened, so the stone matches the real boxes.Illustration

What decides the cost of kitchen countertops in Los Angeles?

Two kitchens with the same footage can land far apart on price. When you compare quotes from any countertop store in Los Angeles, line up these items so you are comparing the same job.

  • Material and grade: common granite colors and solid quartz sit lower; rare granites, heavily veined quartz and premium marble sit higher.
  • Slab or prefab: prefabricated tops cut fabrication time; full slabs add templating and custom shaping.
  • Square footage and shape: an L-shape with an island needs more stone and more seams than a single straight run.
  • Thickness and edge: thicker stone and detailed edges such as ogee take longer to shape than an eased edge.
  • Cutouts: each undermount sink, cooktop and faucet hole is extra work.
  • Removal and access: tearing out old tile or laminate tops and carrying heavy pieces up stairs both add labor.
Eased, bullnose and ogee edge profiles on granite and quartz countertop corner samples
Edge profiles side by side: the more detailed the edge, the longer it takes to shape.Illustration

Bathroom countertops and vanity tops

Bathrooms are where remnant-friendly sizes and prefabricated pieces shine. A 30- or 48-inch vanity rarely needs a full slab, and a glass bowl sink set on a stone top makes a small powder room feel finished. Marble works well here because bathroom counters see less acid than kitchen counters. For vanity cabinets and tops together, see vanity tops and bathroom vanities.

Small powder room vanity with a white marble top and a clear glass bowl sink
A short marble vanity top with a glass bowl sink rarely needs a full slab.Illustration

Why Adcom as your countertop store in Los Angeles

  • Slab and prefab under one roof. Pre-fabricated or slab countertops let a kitchen or bath be customized while staying cost-efficient.
  • Granite, quartz and marble. All three are available, so the comparison happens in one place instead of across three yards.
  • Counters chosen with cabinets and tile. Local and imported cabinetry, backsplash tile and flooring sit in the same showroom.
  • Careful installers. Google reviewers describe granite installers who hand-shaped a difficult section of countertop to make it fit.
  • Value-minded quoting. Reviewers also say the team matches or beats other quotes within reason.

Living with new stone, and who handles the hookups

Wipe spills with a soft cloth and mild dish soap, skip vinegar and bleach on natural stone, and keep cutting boards and trivets within reach. Granite and marble should be resealed periodically; a few drops of water that darken the stone within minutes means it is time.

Stone setters usually hold the CSLB C-54 class, which covers natural and simulated stone slabs on indoor horizontal surfaces.

Countertop shoppers come to Sherman Way from well beyond North Hollywood. Burbank homeowners are about 14 minutes away, Glendale about 24, and Santa Clarita roughly 30 minutes up the freeway, while our Los Angeles city page reaches from Studio City and Van Nuys out to the Westside.

Countertops services

What Google reviewers say

Quoted from public Google reviews. Adcom Kitchen & Flooring has 20 Google reviews; read them all on Google.

“Tony is the best. Great Value, and service. Tony stands behind his products. His granite installers went above and beyond and handcrafted a part of the counter top that required extra effort.”
Vince G. Google review · c. 2019
“Great selection great service. Tony Jr. Was great he beat everyones prices and he stands by his word. Very easy to work with. If he doesn't have the tiles not to worry he'll find it and beat any price within reason.”
Carlo B. Google review · c. 2018
“Tony and his guys are awesome. We purchased our flooring and installation from him, and couldn’t be happier with the results. He helped us find a style that we would love, and the installation was well done.”
Shanna Google review · c. 2025

Countertops around Los Angeles and Ventura counties

Countertops: common questions

What countertop materials do you carry?

Granite, quartz and marble, in full slabs and prefabricated tops. Granite offers natural variation and heat resistance, quartz gives consistent color and needs no sealing, and marble, including Carrara, brings soft veining for islands and vanities. Seeing all three beside your cabinet finish in the North Hollywood showroom usually narrows the choice within one visit.

What is the difference between slab and prefabricated countertops?

A full slab is cut to a template of your installed cabinets, so seams, edges and overhangs are planned for your room. A prefabricated top comes pre-cut to standard depths with a finished edge and is trimmed to length on the job. Prefab saves fabrication time and cost on straight runs; slab handles islands, L-shapes and statement stone.

How soon after cabinets can countertops be installed?

Templating happens once the base cabinets are set, level and fastened to the wall, because stone is measured to the real boxes. Fabrication time after templating depends on the material and the shop's schedule, so ask for an estimate when you order. Have the sink and cooktop chosen before templating so their cutouts are measured at the same time.

Do you cut sink and cooktop openings on site?

Most cutouts are made during fabrication, where the stone can be cut wet and supported properly, using the sink template and cooktop specifications. Small adjustments may be made at installation. That is why the sink model and the cooktop or range should be picked before the template is taken, not after the stone arrives.

Can I bring a cabinet door to compare with countertop samples?

Yes, and it helps. A door or drawer front shows how the stone reads against your actual finish under showroom light. If you are replacing cabinets too, you can pick doors, counters and backsplash tile in the same visit. Bring a floor sample or a photo of your flooring as well, since it changes how warm or cool the stone looks.

Are quartz or granite countertops better for a family kitchen?

Both hold up well. Quartz suits families who want a wipe-and-go surface with no sealing and very consistent color. Granite suits cooks who set hot pans down and like natural variation, and it needs periodic resealing. A common compromise is quartz on the perimeter and a bold granite on the island, or the reverse, to get both benefits.

Request a countertops quote

Calling is fastest: (818) 765-9955. Prefer to write? Send the basics and the showroom will get back to you.

Faster: call (818) 765-9955

Ready to see it in person?

Bring your photos and measurements to the Sherman Way showroom, or call and talk it through first.

Adcom Kitchen & Flooring · 13259 Sherman Way, North Hollywood, CA 91605 · Get directions · Showroom hours

Call (818) 765-9955 Directions